Kongsberg SIMRAD HT20470, Installation Manual

Page: 21 / 50

492671/C
19
List of topside cables
Each topside cable used by the sonar system is listed.
Cable Type From To Minimum requirements /
Comments
C1 AC Power cable Uninterruptible
power supply
(UPS) Vessel AC power 2 x 1.5 mm 2 + 1.5 mm 2 Ground
C2 AC Power cable Display Uninterruptible
power supply
(UPS) 2 x 1.5 mm 2 + 1.5 mm 2 Ground
C3 AC Power cable Processor Unit Uninterruptible
power supply
(UPS) 2 x 1.5 mm 2 + 1.5 mm 2 Ground
C4 AC Power cable Power Supply Unit Uninterruptible
power supply
(UPS)
2 x 1.5 mm 2 + 1.5 mm 2 Ground
This cable is only required if the
DC version of the Processor Unit
needs to operate from AC power.
C5 AC Power cable Operating Panel Uninterruptible
power supply
(UPS)
2 x 1.5 mm 2 + 1.5 mm 2 Ground
This cable is only used with
Operating Panel Mk2.
C6 DC Power cable Processor Unit Vessel DC power 2 x 6 mm 2
C7 DC Power cable Processor Unit Power Supply Unit 2 x 6 mm 2
C8
Ethernet cable Processor Unit
Sonar room
CAT5-E STP (Shielded Twisted
Pair)
C9 Video cable Processor Unit Display This is a commercial cable.
C10
Ground cable Processor Unit Vessel ground
1 x 6 mm 2
C11 USB cable Processor Unit Operating Panel This is a commercial cable. This
cable is only used with Operating
Panel Mk3.
C12 Ethernet cable Processor Unit Operating Panel This is a commercial cable. This
cable is only used with Operating
Panel Mk2.
C13 Serial cable Processor Unit External device(s) 2 x 4 x 0.5 mm 2
C14 Ethernet cable Processor Unit Local Area
Network (LAN) This is a commercial cable.
C15 Audio cable Processor Unit Loudspeakers 2 x 0.25 mm 2
Cable numbers that are not used are spares for optional equipment and/or future expansions.
For more information about the cables, see: Comments, page 20
Cable layout and interconnections