Kongsberg Seatex AIS 100, Instruction Manual

Page: 72 / 113

Seatex AIS 100 Instruction Manual, rev. 5 External interfaces
64
LR3 – Long-range Reply for function requests "I,
O, P, U and W"
The LR3-sentence contains the information requested by the "I, O, P,
U, and W" function identification characters (see the LRF-sentence).
NOTE 1 If the sentence is used, the two fields, Sequence Number and MMSI of
responder, are always provided.
NOTE 2 The sequence number should be the same number as the sequence
number of the LRI and LRF sentences that initiated this reply.
NOTE 3 The individual information items shall be a null field if any of the
following three conditions exist:
The information item was not requested,
The information item was requested but is not available, or
The information item was requested but is not being provided.
NOTE 4 Current number of persons on-board, including crew members: 0 to
8191.
0 = default (not available), 8191 = 8191 or more people.
NOTE 5 The characters that can be used are listed in IEC 61162-1, table 2.
Some characters in this table are the reserved characters listed in IEC
61162-1, table 1. Reserved characters may be used, but they must be
represented using the "^-method" (See IEC 61162-1, § 5.1.3.).
NOTE 6 See ITU-R M.1371:2000, table 17, parameter "Type of ship and cargo
type" for the range of valid values available for this field.