Seatex AIS 100 Instruction Manual, rev. 5
Installation
43
Antenna cabling
•
The cable should be kept as short as possible to minimise
attenuation of the signal. A double shielded coaxial cable equal or
better than RG-214 is recommended.
•
All outdoor installed connectors on the coaxial cables should be
fitted with preventive isolation such as shrink stocking with glue
to protect against water penetration into the antenna cable.
•
Coaxial cables should not be exposed to sharp bends, which could
change the characteristic impedance of the cable. The minimum
bend radius should be 5 times the cable diameter.
VHF antenna cable connection
The following procedure should be used for proper mounting of cable
connectors:
Figure 19 VHF and GPS antenna cable connector termination
Summary of Contents for Seatex AIS 100
