Operation
374876/B
9
4
OPERATION
This chapter describes how to start using the cPAP unit
Topics
→
cPAP Front panel on page 9
→
Turning unit ON and OFF on page 10
→
Setting up the cable drum with the dunking transducer on page 12
→
cPAP APOS Menu on page 13
→
Operation of subsea transponders on page 14
→
Transponder test and configuration on page 17
cPAP Front panel
Figure 2 cPAP Front panel
The touch screen is mostly used when performing Acoustic test
and Transponder configuration. All other connections and
buttons are explained below:
A
Connector
(with protection cap) for Serial line. For
service personnel only. (For program downloads and
configuration purposes).
B
Connector
(with protection cap) for Dunking transducer
cable.