Operation
374876/B
11
2
Place the cPAP Portable unit in a suitable location and
open the lid by pressing the handle knobs and pull the
handles towards you.
Figure 3 Opening the cPAP portable case
3
Place the cable drum close to the cPAP.
4
Prepare the cable drum for operation.
-
See description in Figure 6.
5
Pull out the transducer cable and lower the dunking
transducer into the sea to a depth at least 10 m below the
lowest part of the platform's/vessel's keel or thrusters.
-
If required - use the handle to reel out the cable.
6
Connect the transducer cable to the connector marked TD
on the top right hand side of the screen of the cPAP.
7
Turn on the cPAP Portable transceiver unit by turning on
the main power switch ON in order to start the PC
program (starting up the system will take approx. 1.5
minutes).
The system is now ready for use!
Turning unit OFF
1
Switch ON/OFF button (D) to OFF position (see cPAP
Front panel on page 9).
→
See APOS Menu on page 13 for more information
