25
Body Assembly 2
BT
(battery)
Box
Front
Rear
M2 ー 6
x4
6cm
6cm
160mm
160mm
160mm
160mm
160mm
160mm
160mm
160mm
Left
Front
Leg
Right
Front
Leg
①-4.
Apply the decal to the cable.
＊As seen upside down
＊Firmly apply the tape
aligned with the uneven surface.
①-5.
Secure with tape, etc. so it doesn't come out easily.
（The diagram is only of the BT box plate
so that it is easy to view.）
BT Hatch x2
＊If installation proves difficult, try temporarily securing
the BT box plate and inserting one BT hatch at a time.
Hinge positions
BT Box plate
②
Wire two 160 mm ZH-ZH connection cables to the other BT box plate.
②-1
.Pull the cable to the length indicated below.
②-2.
Secure with tape, etc. so it doesn't come out easily.
＊Push firmly.
＊As seen from the side:
When complete, this is on the bottom.
BT Box plate
＊As seen upside down
②-4.
Attach the plate on the opposite side so
that it sandwiches the two BT hatch plates.
②-3.
Assemble by wiring through
the BT box.
（Wired cable）
KXR-L4D
