the fan speed with the button, and
the direction of vertical and horizontal
air flow with the and buttons.
You may change the mode at any time you
want.
ECO
(Energy Saving)
Func-
tion
When the ECO function is enabled by
button, the energy consumption decreas-
es up to 30% in the cooling and heating
modes depending on the model. When
the ECO function is enabled, the temper-
ature adjustment interval of your remote
control will be automatically between 23-
30 °C in the cooling mode.
There will be
no temperature adjustment lower than
23 °C for the cooling mode and higher
than 24 °C for the heating mode
When
you press the button, the icon will
be displayed on the remote control display.
• After the ECO mode is enabled, if
any mode switch is made, the ECO
function will be disabled. It should be
adjusted again when necessary.
• The ECO function can be set for the
cooling and heating modes. To cancel
the function, press again.
• You may operate the sleep function
when the ECO function is enabled.
In this case, due to the ECO function,
there will be some limitations in the
adjustable temperature interval.
• When both the sleep mode and the
ECO function are active, you may
cancel the Sleep mode or the ECO
function any time you wish.
WARNING:
When the ECO function is
active, the air conditioner's capacity may
fall.
Horizontal Fin Function
You can adjust the direction of the air
blown out by the indoor unit of your air
conditioner vertically by pressing the
button. Every time you press the button,
the position of the fin changes. The hori-
zontal fin may be adjusted in 5 different
positions. If you continue to press the but-
ton, horizontal fins start to move up and
down automatically. If you press the button
one more time, the movement will stop.
WARNING:
Never interfere the horizon-
tal fins by hand.
Automatic Mode
For the automatic mode, press
until
you see the icon on the remote control
display. Your air conditioner will determine
its operating mode automatically accord-
ing to the environment temperature. De-
pending on the temperature, it performs
dehumidification, cooling or heating. In
this mode, the air conditioner operates
with the target of 24
2
°C adjustment inter-
val. The highest and lowest temperature
values that determine the operating mode
of the automatic mode, are 20 and 27°C.
• If the environment temperature is be-
low 20°C conditioner starts heating.
• If the environment temperature is be-
tween 20°C and 27°C, the air condi-
tioner starts dehumidification.
• If the environment temperature is
above 27°C, the air conditioner starts
cooling.
• During cooling or heating, the fan
operates automatically. At the same
time, the turbo mod can also be op-
erated but the fan speed cannot be
26
