Konami RACING JAM, Operator'S Manual

Page: 6 / 71

4
Setting Up
•Be sure to use indoor wiring for within the specified voltage range. For extension cord, use
indoor wiring of the specified rating or more.
·Failure to do so could result in fire or equipment failure.
•Be sure to use the attached power cord and networking cable.
·Otherwise a fire or machine trouble may result.
•Never plug more than one cord at a time in the electrical receptacle.
·Doing so could result in fire or electrical shock.
•Never use the attached networking pin jack for any game machines other than the
“RACING JAM
TM
” machines, nor for any audio-visual appliances and communication
equipment. While the communication mode is not used, keep the networking pin
jack open.
·Otherwise the game may fail to work or get in trouble.
•Lay the power cord, networking cable away from the passages where people walk
along.
·Otherwise people may trip over them and get injured. The cable may also be stepped on
and get damaged.
•Do not bend the networking cable by force or place heavy objects on it.
·Doing so could result in electric leakage or fire.
•Be sure to ground this product.
·Otherwise an electric shock or machine trouble may be caused.
•Clearance of 100 mm (3.94in) or more should be created between the game
machine and walls. When two or more machines are placed side by side, be sure to
provide a clearance of 100 mm (3.94in) or more between them.
·Otherwise the machine (s) cannot be ventilated well, resulting in malfunction.
CAUTION
Operation
4
WARNING
Precautions for use
•If there is any abnormality such as smoke, bad smell or abnormal noise being
emitted from the machine, immediately turn OFF the main power switch and unplug
the power cord from the receptacle to stop operating it.
·Using the machine in abnormal conditions could result in fire or accidents.
In case of abnormality
1 Turn OFF the main power switch.
2 Unplug the power cord from the receptacle.
3 Contact your nearest dealer.
•Do not leave the power cord plugged improperly or covered with dust.
·Doing so could result in electrical shock or fire, so inspect the power cord periodically.
•Never disassemble, repair or modify any section other than those specified in this
manual.
·Doing so could result in fire, malfunction or equipment failure.
·Ask your nearest dealer to perform repairing, etc..
·We do not assume any responsibility for any damages that would be caused
by tampering with the machine.
ENGLISH