Konami RACING JAM, Operator'S Manual

Page: 49 / 71

47
Ballast
Fluorescent light unit
Glow lamp
(FG-5P)
Billboard
7-2 Replacing the fluorescent light
How to replace the fluorescent light
1
Remove the fluorescent light unit
lock screws off the top of the
billboard.
2
Lift the fluorescent light unit off
position. Be careful not to hit
against the ballast.
•Before replacing the fluorescent light, be sure to turn OFF the main power
switch and unplug the power cord from the receptacle.
•The fluorescent light is hot just after it is put off. Wait until it cools down
and then replace it with a new one of the same type (straight tube 32W/100V).
•When installing and removing the fluorescent light unit, take care not to
damage the wiring connecting the fluorescent light unit and the game
machine.
•It is recommended that the glow lamp should be also replaced.
MEMO
7 Maintenance and annex
3
Push one end of the fluorescent
light in the direction of the socket.
The other end of the fluorescent
light will be datached from the
opposite socket.
4
Install a new fluorescent light in the
reverse order.
Push in this direction