Konami Nagano Winter Olympics '98, Operator'S Manual

Page: 15 / 22

13
The original factory settings are displayed in green; the changed settings are displayed in red.
Move the 1P joystick up and down to select an item to be modified, and move it right and left to
change its setting.
·A fter the settings have been modified, select "SAVE AND EXIT" and press the 1P start button.
The new settings are saved automatically and the screen returns to the main menu.
·I f "EXIT" is selected after the settings have been changed, the message "YOU DID NOT SAVE.
DO YOU WANT TO SAVE? YES/NO" will appear. Move the 1P joystick right or left to select
"YES" or "NO" and press the 1P start button.
If “YES” is selected, the message “NOW SAVING” will appear, the modified settings will be
saved and the screen will return to the main menu.
If “NO” is selected, the message “NO MODIFICATION” will appear and the modified settings will
not be saved.
3-3 Mode descriptions
•If "FACTORY SETTINGS" is selected and the 1P start button is pressed, all the settings will
return to the factory ones.
MEMO
I/O CHECK
Mode for checking the performance of each control.
When any control switch is pressed, "1" appears on the screen.
To return to the main menu, press the 1P and 2P start buttons at once.
Checking the controls
SCREEN CHECK
Adjusting the screen width
Mode for checking the screen display.
Adjust the width and factors of the monitor screen while watching the crosshatch pattern. Use
the monitor adjustment PCB to make the adjustments.
To return to the main menu screen, press the 1P start button.
COLOR CHECK
3 PCB settings
Mode for checking the display color.
Make the adjustment using the monitor adjustment PCB so that the colors of the color bars
should appear properly graduated and background should become black sufficientry.
To return to the main menu screen, press the 1P start button.
Adjusting the display color