KOMPATTO KH061, Installation, Use And Maintenance Manual

Page: 27 / 52

27
KOMPATTO installation, use and maintenance manual
4. Regeneration program
4.3. Set the regeneration with probe at the core
Access the main page and enter the regenera-
tion program.
Select the pin probe function by pressing the
key
R2 fig. 41 . The program will automatically
propose a final core temperature of 60 °.
YOU can change the core regeneration tem-
perature by pressing the key
R1 ( fig. 41 ) and
turn the dial M . Confirm the selected value by
pressing the dial M .
Now press the Start button ( S2 fig. 9 page
9 ) to start the program.
i
Wait for the initial pre-heating phase
to complete and then load the oven.
4.4. Special regeneration functions
To set the Soft or Crispy regeneration, pro-
ceed as described in sections 4.2 e 4.3 . to
set the time or core temperature and click the
button:
SOFT
Soft: for soft regeneration
CRISPY
Crispy: for crispy regeneration.
When a function is selected, the button turns
red.
Note: each function disables the other func-
tions. For example, you cannot regenerate
food with the function
Soft , Crispy or Nor-
male simultaneously.
Now press the Start button ( T2 fig. 9 page
9 ) to start the program.
i
Wait for the initial pre-heating
phase to complete and then load the oven.
CRISPY
SOFT
Dom 02-10-15 20:32
MEM
60°
Roast beef
Regeneration
programs
0:06
CRISPY
SOFT
Dom 02-10-15 20:32
MEM
Crispy wings
Regeneration
programs

fig. 41

fig. 42
R2
R1