20
230°
START
ALL
5
6
4
3
2
1
3. Manual setup
3.10. Multilevel cooking with RACK CONTROL
Select the
RACK CONTROL
mode pressing
the relative key
S7
fig.
27
;
Note:
The key
S7
will be displayed only if the
time
S3
is set to infinite (
INF
).
Once the oven is set to
RACK CONTROL
mode, you can set the time or core probe tem-
perature up to 6 values in relation to the vari-
ous levels present inside the oven.
Example:
•
level 1 = 10 minutes
•
level 3 = 60°C core probe
•
level 4 = 7 minutes
Set the timer or core probe temperature to the
desired level by selecting the relative level. A
pop-up will be displayed, enabling you to se-
lect the timer (
a
) or core probe (
b
) mode. Se
-
lect the desired mode, and set the value by
turning the dial
M
. Confirm by pressing the
dial
M
or the pop-up.
ON the left side of the screen it is possible to
set or modify the cooking parameters (mode,
temperature, fan, etc.)
THE
RACK CONTROL
can be used in two
different modes:
•
with oven in
STOP
mode (programming);
•
with oven in
START
mode (cooking al-
ready started).
Setting the values of various levels with the
oven in
STOP
mode; one you have pressed
the
Start
button (
T2 page
9
) the oven will
start cooking with the values set for: cooking
mode, temperature, etc. .. set (with the rela-
tive automatic pre-heating cycle, if set). The
operator should then manually start the timer/
control of core temperature for each level by
pressing on the pan icon (
) related to the
desired level. When a level has been activated
the icon will turn red
.
YOU can start all the levels at once by pressing
the corresponding key
S13 fig. 29
.
If you use the
RACK CONTROL
mode, in-
stead, with the oven set to
START
, after you
have set the timer or core probe temperature
value, the dedicated control will start automat-
icall, once you have confirmed the value set.
Upon reaching the set core temperature or at
the end of the time set on the relative level,
on display appears the writing
END
and the
oven emits an acoustic signal. At this point you
MEM
PRE
HEAT
180°
INF
Manuale
Fase 1 / 1
Dom 02-10-15
20:32
fig. 27
a
b
230°
START
ALL
5
6
4
3
2
1
0:05
55°
S7
S3
S13
fig. 28
fig. 29
Summary of Contents for KH061
