KOMPATTO KH061, Installation, Use And Maintenance Manual, Page: 11 / 52

11
KOMPATTO installation, use and maintenance manual
The appliance was designed to cook food indoors and should only be used for this function:
any other use should be avoided as it is considered improper and dangerous.
During operation, supervise the appliance.
Before cooking, run a pre-heating cycle for the oven at a temperature of about +30 ° / +40
° C higher than necessary.
The "touch-screen" fitted on the oven provides quick and intuitive access to all functions. The
parameters and settings of each function can be set by choosing the function on the display,
selecting the desired value by turning the dial
M and confirming this value by pressing the
button or the dial
M
. By pressing the dial M you can silence the alarms.
When switched on, the display shows the main menu where you can choose between
manual
cooking
,
recipes
,
service
or
regeneration
* ( * for KH models only).
2. Instructions for use
2.1. Identification of controls
T1 : STARTUP AND SHUTDOWN
it allows you to turn the oven on and off by pressing it for a few seconds.
T2 : START/STOP KEY
it enables starting and stopping the cooking cycle. This key can be:
o
n
: cooking in progress;
o
ff
: cooking not in progress or stopped;
f
lashing
: cooking is in waiting state (door open, error messages or confirmation
of operations).
T3 : ESC KEY:
it allows the user to return to the previous page.
T4 : MENU KEY:
it enables the user to return to the main menu.
T5 : LIGHTING KEY:
to turn on the lighting system in the cooking chamber.
TS : TOUCH SCREEN:
touch screen. The operating parameters of the appliance are set and displayed on this
screen.
M : DIAL WITH ENCODER:
The dial is used to set the values on the screen. If the dial is pressed, the value en-
tered is confirmed.
2.2. Preliminary information