A
s
s
e
m
b
l
y
I
n
s
t
r
u
c
t
i
o
n
s
(
R
e
m
o
v
a
b
l
e
)
A
s
s
e
m
b
l
y
I
n
s
t
r
u
c
t
i
o
n
s
(
R
e
m
o
v
a
b
l
e
)
2
Using the included Bolt and washer (4) insert through the Drawbar (3)
attaching hitch to UTV receiver. Next use one each Bolt and Nut (5) attach
through the center hole on the drawbar (3) and the bottom hole on the
Extender tube (2). Do not tighten bolts yet.
U
s
e
o
f
C
h
o
c
k
U
s
e
o
f
C
h
o
c
k
Once Hitch Bumper is installed properly, the rear of the UTV has some protection and you
can tow safely. Check towing accessory making sure to use all safety fastening methods, ex.
chains. The Bumper can be reconfigured to different angles and extended by simply
removing the Bolt and Nut; then reinserting into position and tightening. This is handy when
towing as it can be used to prohibit load shift or as a step to allow easy access to bed.
1.
Next insert the Bumper (1) by sliding into Extender tube (2). At this
point, the bumper needs to be decided upon its location. First rotate
the bumper into position and insert a Bolt and Nut (5) into hole
closest to angled position.
2.
Next, extend Bumper (1) up to level making sure
tailgate and other components do not interfere, and
insert a Bolt and Nut (5) into hole on extender. Once
satisfied with the position tighten all fasteners.
3.
Bumper can be adjusted to keep load from shifting
in trailer or to use as step to get in and out of bed.
