Komfovent RHP Standard, User Manual

Page: 19 / 44

19
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP STANDARD_guide_21-03
Reset settings
Enable
Start when indoor
25 °C
Stop when indoor
20 °C
Summer night cooling
Reset settings
Enable
Setpoint
15 °C
Minimum temperature ...
• Summer night cooling (SNC)
Setting two indoor temperatures for the function to start running and stop.
• Minimum temperature control (MTC)
Setting a minimum desired supply air temperature.
• Additional zone control (ZN)
1
In this window you can set a desired supply air temperature for an individual ventilation zone.
1
This function only runs when optional additional zone modules are connected.
• Override function (OVR)
Selecting conditions for activating the function (all the time, only when the unit is running,
only when the unit is stopped) and specifying ventilation mode for the unit to run when the
function starts. If the “Standby” ventilation mode is selected, the unit will be stopped.
Reset settings
Enable
Override
If on
Operation modes
ECONOMY 1
Override function
Reset settings
Enable
Setpoint 1
55% RH
Mode 1
COMFORT 1
Setpoint 2
30% RH
Mode 2
ECONOMY 2
Humidity control
• Humidity control (HUM)
Setting a desired relative humidity level. Humidity level is set for two different ventilation
modes during which this function will be used and the desired value will change automatically as
the mode changes. If the unit operates in a different ventilation mode than the one set, humidity
control function is disabled automatically.
Reset settings
Enable
Setpoint
22.0 °C
1st additional zone c...