Komatsu Utility WB97S-5 Operation & Maintenance Manual Download Page 92 | Manualshive

Page: 92 / 280

background image

INSTRUMENTS AND CONTROLS

90

16 - Left stabilizer control lever

17 - Right stabilizer control lever

18 - Left backhoe control lever

19 - Right backhoe control lever

20 - Pattern change control lever (if provided)

1 - GEARSHIFT-REVERSE GEAR LEVER

WARNING

q

Since no mechanical connection is provided between the gearbox and the engine, if the machine is
parked on a slope it can move freely even with engaged gears; for this reason, always shift the lever (1)
into neutral (N) and apply the parking brake. Non-compliance with this rule may lead to serious
accidents.

q

The machine is equipped with an acoustic alarm that is activated if the operator, with the engine
running, shifts the reverse gear lever (1) to position (F) or (R) with the seat rotated in any position
different from the correct driving position. This is a danger signal, since it is absolutely forbidden to
move the machine while working with the backhoe equipment or in any case with the seat rotated by
180° with respect to the regular driving position. Remember that the operator is allowed to move the
machine only while seated in the correct driving position, with locked seat and fastened safety belt.

IMPORTANT

q

The engine can be started only with the gears in neutral (N).

q

If the operator deems it necessary, the machine may also be equipped with an acoustic alarm for
movements in reverse. This device can be installed on an apposite area on the rear part of the frame (see
"2.4.4 CHECKS FOR TRAVELLING IN REVERSE"); before carrying out any movement in reverse it is
recommended to make sure that this device functions perfectly. To check the functionality of this
acoustic alarm, proceed as follows:

-Start the engine (see "3.6.2 STARTING THE ENGINE").

-Press the brake pedals

-Shift the reverse gear lever (1) to the reverse position R.

If the alarm does not work, have the machine checked by your Komatsu Dealer.

RKAB3140

16

17

RKA15080

18

19

20

https://tractormanualz.com

«
...
90
91
92
93
94
...
»

Summary of Contents for Utility WB97S-5

























































































































































































































































































Reviews:

No comments

Related manuals for Utility WB97S-5

KH500 Versa-Loader

Brand: Ventrac Pages: 41

Brand: Takeuchi Pages: 352

Brand: PITBULL Pages: 71

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands