Komatsu PC30MR-5, Operation & Maintenance Manual

Page: 109 / 380

2.
Select the setting time on “Auto Idle Stop Timer Set” selec-
tion screen, and then press the function switch “F4”.
On “Auto Idle Stop Timer Set” selection screen, you can
perform the following operations with function switches
“F1” to “F4”.
Function switch “F1”
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
Function switch “F2”
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
Function switch “F3”
Cancels the selection and returns the screen to “Machine Setting” menu screen.
Function switch “F4”
The screen changes to “Auto Idle Stop Timer Set” confirmation screen.
REMARK
• If you select “OFF”, the auto idle stop function does not operate.
• You cannot select a time longer than that specified in the service menu.
3.
“Auto Idle Stop Timer Set” confirmation screen is dis-
played.
Press the function switch “F4” on “Auto Idle Stop Timer
Set” confirmation screen.
If you press the function switch “F3”, the screen returns to
“Auto Idle Stop Timer Set” selection screen.
4.
“Auto Idle Stop Timer Set” completion screen is displayed.
If you press the function switch “F4” on “Auto Idle Stop
Timer Set” completion screen, the screen returns to “Ma-
chine Setting” menu screen.
When the elapsed time of idling reaches 30 seconds be-
fore the preset time, the machine monitor returns to the
standard screen, and changes to the countdown screen,
and the guidance icon on the bottom right lights up in yel-
low.
If you press the function switch “F4”, the screen changes
to “Auto Idle Stop” screen and you can check the state.
OPERATION EXPLANATION OF COMPONENTS
3-43
WENAM00150