Komatsu PC210-8, Shop Manual

Page: 476 / 1200

UEN00229-01 30 Testing and adjusting
38
PC210, 230, 240-8
4. Contents of setting of each maintenance item
After selecting each maintenance item, if the
screen is displayed, set the item with the func-
tion switches.
q
Initial value: Maintenance interval set in
machine monitor (Recommended by man-
ufacturer and not changeable).
q
Set value: Maintenance interval which can
be set freely. Maintenance functions in
operator mode operate on basis of this set
time (which is increased or decreased by
50 hours).
q
ON: Maintenance function of this item is
set effective in operator mode.
q
OFF: Maintenance function of this item is
set ineffective in operator mode.
q
[F3]: Select Reduce set value (Upper) or
OFF (Lower).
q
[F4]: Select Increase set value (Upper) or
ON (Lower).
q
[F5]: Cancel setting before confirmation
and return to Maintenance mode
change screen.
q
[F6]: Confirm setting of upper or lower line.
a
After the setting of the upper and lower
lines is confirmed with [F6] and the screen
changes to the Maintena nc e mode
change screen with [F5], the setting is
effective.
a
If the set value of an item set to ON is
changed after 1 or more operating hours
since the start of setting, the change is
recognized as a resetting operation.
5. Function of initializing all items
After selecting "All default value", if the screen
is displayed, set with the function switches.
q
If this operation is executed, the set val-
ues of all the maintenance items are ini-
tialized.
q
[F5]: Return to Maintenance mode change
screen
q
[F6]: Execute initialization
a
A while after [F6] is pressed, the initializa-
tion completion screen is displayed. Then,
if the Maintenance mode change screen is
displayed, initialization is completed.