Komatsu PC210-8, Shop Manual, Page: 442 / 1200

UEN00229-01 30 Testing and adjusting
4
PC210, 230, 240-8
t
Ordinary functions and special functions of machine monitor
The machine monitor has the ordinary function and special functions and displays information of various
types on the multi-display.
Some items are displayed automatically according to the internal setting of the machine monitor and the oth-
ers are displayed according to the operation of the switches.
1.
Ordinary functions: Operator mode
The items in this mode are displayed ordinarily. The operator can display and set them by operating the
switches (Display and setting of some items need special operations of the switches).
2. Special functions: Service mode
The items in this mode are not displayed ordinarily. Each serviceman can display them by operating the
switches specially. This mode is used for special setting, testing, adjusting, or troubleshooting.
t
Operator mode (Outline)
Page
Service mode
Page
6p
O
(S
peci
al
op
erat
ion
)
21p
A Display of KOMATSU logo 6p Monitoring 22p
A Display of inputting password 7p
Abnormality
record
Mechanical systems 26p
A Display of check of breaker mode 7p Electrical systems 27p
A Display of check before starting 7p Air-conditioning system/Heater system 33p
A Display of warning after check before starting 8p Maintenance record 34p
A Display of ending of maintenance interval 8p Maintenance mode change 35p
A Display of check of working mode and travel speed 8p Phone number entry 37p
A Display of ordinary screen 8p
Default
Working mode with key ON 38p
A Display of end screen 9p Setting of unit 39p
B Selection of auto-deceleration 9p With/Without attachment 40p
B Selection of working mode 9p
Setting of attachment/maintenance
password
41p
B Selection of travel speed 10p Setting of camera 42p
B Operation to stop alarm buzzer 10p Setting of ECO display 43p
B Operation of windshield wiper 11p Setting of automatic judgment of breaker 44p
B Operation of window washer 11p
Adjustment
Pump absorption torque (F) 45p
B Operation of air conditioner/heater 11p Pump absorption torque (R) 46p
B
Operation to display camera mode
(if camera is installed)
12p Setting of travel Lo speed 47p
B Operation to display clock and service meter 12p
Adjustment of flow to attachment in
compound operation
48p
B [KOMTRAX message] 15p Reduced cylinder mode operation 49p
B
Setting and display of user mode
(Including KOMTRAX messages for user)
15p
No-injection cranking 50p
Display of fuel consumption 52p
C Display of energy-saving guidance 15p
Display of
KOMTRAX
Setting condition of terminal 53p
C Display of caution monitor 15p
Condition of positioning and
communication
54p
C Display of automatic judgment of breaker 16p MODEM S/N (Model TH300) 55p
C Display of user code and failure code 16p MODEM IP address (Model TH200) 56p
O
(Special operation) Display of KOMTRAX message 57p
D
Function of checking display of LCD
(Liquid Crystal Display)
18p
D Function of checking service meter 18p
D
Function of changing attachment/maintenance
password
19p