Komatsu Galeo PC27MR-2, Operation & Maintence Manual

Page: 155 / 261

.
OPERATION
LONG TERM STORAGE
LONG TERM STORAGE
BEFORE STORAGE
NOTICE
To protect the hydraulic cylinder piston rod while in storage, keep the work
equipment in the posture shown at right.
(This prevents rust from developing on the piston rod)
When keeping in long-term storage (more than one month), store as follows.
Clean and wash all parts, then store the machine indoors. If the machine has to be stored outdoors, select level
ground and cover the machine with a sheet.
Completely fill the fuel tank. This prevents moisture from collecting.
Lubricate and change the oil before storage.
Coat the exposed portion of the hydraulic cylinder piston rod with grease.
Disconnect the negative terminals of the battery and cover it, or remove it from the machine and store it
separately.
Lock each control lever and pedal with the lock lever and swing lock cover.
Set the stop valve to the LOCK position on machines ready for attachments. Install the blind plugs to the elbows.
Set the selector valve on the machines which can install attachments to the "Crusher or general attachment"
position.
3 - 103