Komatsu Utility 395F6001, Operation & Maintenance Manual

Page: 121 / 254

GUARDS, CAB AND DRIVER’S SEAT
119
3.5.2 CAB
DANGER
• If, for any reason, the cab is subjected to an impact, or if
the machine overturns, immediately contact your Komatsu
Utility Dealer, which will verify the stiffness of the cab and
make sure that the operator’s safety is guaranteed.
• When working or travelling at low speed, keep the lower
part of the door closed, in order to be protected from for-
eign materials that may get into the cab.
• When travelling at high speed, it is necessary to close the
door and also the upper window.
• When opening or closing the door, pay attention not to hit
persons staying around the door.
• When leaving the machine or moving so far that it cannot
be seen any more, lock the door.
The cab is provided with a single door (1) that is used by the oper-
ator to get on and off the machine.
The door comprises two parts that can be opened independently
of each other and that can be opened completely and secured in
this position.
• The upper part (2) of the door is used to ensure the circulation
of fresh air.
To open and fix it, pull the handle (3) and open the upper part
(2) completely, until engaging the pin (4) in the safety retainer
(5).
To close it, pull the knob (6) to release the pin (4) from the re-
tainer (5), then close the window until engaging the pin (7) in the
lock (8).
• To open the entire door completely and lock it, the upper part
must be closed; then pull the handle (9) and open the door until
the pin (4) engages in the retainer (5).
To close the door, release the pin by pushing or pulling the knob
(6).
RKAA1250
1
2
RKAA1260
4
5
6
9
RKAA1300
4
5
7
8
3
RKAA1210
6