INSTRUMENTS AND CONTROLS
98
6-3 HYDRAULIC EQUIPMENT CONTROL PUSH BUTTONS
DANGER
• After using the auxiliary line for the equipment, disconnect
the circuit.
Failure to disconnect the line after use may cause serious
accidents and even death.
In order to be able to use the auxiliary line for the hydraulic equip-
ment, it is necessary to connect the circuit by pressing button on
the dashboard (see «3.2.3 SWITCHES AND PUSH BUTTONS»).
The buttons that control the hydraulic equipment are identified by
AUX1 - AUX2, as shown in the illustration.
IMPORTANT
• After connecting the pipes to the equipment, the operator
must try the AUX1 - AUX2 buttons to verify the directions
of rotation or the movements produced by each individual
push of the buttons.
• Before starting work, the operator must check the corre-
spondence between the AUX buttons and the directions of
movement of the equipment, since the person who con-
nected the pipes may have inverted the connections.
6-4 TRANSMISSION DECLUTCH PUSH BUTTON
DANGER
• Avoid using this button when the machine works or travels
on slopes.
This button is used in TRAVEL-WORK and TRAVEL operat-
ing modes when heavy loads must be lifted and therefore all
the hydraulic power developed by the machine must be avail-
able.
The transmission is disconnected by keeping this button (
C
)
pressed; in this way, all the power developed by the engine
can be used by the hydraulic system.
The transmission remains disconnected as long as the but-
ton is kept pressed.
This function can be used with any gear engaged.
RKAA0624
AUX 1
AUX 2
RKAA0830
C
Summary of Contents for 395F6001
