background image

GUARANTEE

1. This  KOLVER  product  is  guaranteed  against  defective  workmanship  or  materials,  for  a

maximum period of 12 months following the date of purchase from KOLVER, provided that
its usage is limited to single shift operation throughout that period. If the usage rate exceeds
of single shift operation, the guarantee period shall be reduced on a prorata basis.

2. If,  during  the  guarantee  period,  the  product  appears  to  be  defective  in  workmanship  or

materials, it should be returned to KOLVER or its distributors, transport prepaied, together
with a short description of the alleged defect. KOLVER shall, at its sole discretion, arrange
to repair or replace free of charge such items.

3. This guarantee does not cover repair or replacement required as a consequence of products

which  have  been  abused,  misused  or  modified,  or  which  have  been  repaired  using  not
original KOLVER spare parts or by not authorized service personnel.

4. KOLVER accepts no claim for labour or other expenditure made upon defective products.
5. Any  direct,  incidental  or  consequential  damages  whatsoever  arising  from  any  defect  are

expressly excluded.

6. This guarantee replaces all other guarantees, or conditions, expressed or implied, regarding

the quality, the marketability or the fitness for any particular purpose.

7. No  one,  whether  an  agent,  servant  or  employee  of  KOLVER,  is  authorized  to  add  to  or

modify the term

s of this limited guarantee in any way. However it’s possible to extend the

warranty with an extra cost. Further information at [email protected].

Summary of Contents for ACE Screw Counter













Reviews: