5
Graphic Operator Terminal /
CONSIDERATIONS AND SAFETY PRECAUTIONS
The supplier neither guarantees that the graphic operator terminal is suitable for your
particular application, nor assumes responsibility for your product design, installation or
operation.
1.3 During
Installation
The graphic operator terminal is designed for stationary installation on a plane surface, where
the following conditions are fulfilled:
–
no high explosive risks
–
no strong magnetic fields
–
no direct sunlight
–
no large, sudden temperature changes
Install the product according to the accompanying installation instructions.
Ground the product according to the accompanying installation instructions.
Only qualified personnel may install the graphic operator terminal.
Separate the high voltage, signal and supply cables.
Make sure that the voltage and polarity of the power source is correct before connecting the
product to the power outlet.
Peripheral equipment must be appropriate for the application and location.
1.4 During
Use
Keep the graphic operator terminal clean.
Emergency stop and other safety functions may not be controlled from the graphic operator
terminal.
Do not use too much force or sharp objects when touching the touch screen etc.
1.5 Service
and
Maintenance
Only qualified personnel should carry out repairs.
The agreed warranty applies.
Before carrying out any cleaning or maintenance operations, disconnect the equipment from
the electrical supply.
Clean the display and surrounding front cover with a soft cloth and mild detergent.
Replacing the battery incorrectly may result in explosion. Only use batteries recommended by
the supplier
