Graphic Operator Terminal /
TECHNICAL SPECIFICATIONS
3 TECHNICAL
SPECIFICATIONS
This chapter provides the technical specifications for the graphic operator terminal.
3.1 Technical Data
The following table provides the electrical and mechanical specifications for the graphic operator
terminal.
Parameters
AKI-CDT-MOD-15T
Front panel
398 x 304 x 6 mm (W x H x D)
Mounting depth
60 mm (160 mm including clearance)
Front panel seal
IP 66
Rear panel seal
IP 20
Touch screen
material
Touch screen: Polyester on glass, 1 million finger touch
operations. Overlay: Autotex F157/F207 *.
Reverse side material Powder-coated aluminum
Weight
3.7 kg
Serial port
RS422 / RS485
25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC.
Serial port RS232C
9-pin D-sub contact, male with standard locking screws 4-
40 UNC.
Ethernet
Shielded RJ 45
USB
Host type A (USB 1.1), max output current 500 mA
Device type B (USB 1.1)
CF-slot
Compact flash, type I and II
Flash memory for
application
12 MB (incl. fonts)
Real time clock
±20 PPM + error because of ambient temperature and
supply voltage. Total maximum error:
1 min/month at 25 °C -0.034±0.006 ppm/°C
2
Rechargeable battery.
Power consumption
at rated voltage
Normal: 1.2 A
Maximum: 1.7 A
Display
TFT-LCD. 1024 x 768 pixels, 64K colors. CCFL backlight
lifetime at the ambient temperature of +25 °C: >35,000 h.
Active area of display
304.1 x 228.1 mm
Fuse
Internal DC fuse, 3.15 AT, 5 x 20 mm
11
