K5 Plus GNSS
- 57 -
As shown in figure, STH file is the data files acquired by K5 PLUS, the
modification time is the end of the data collection time. The original files can be
copied directly to PC, you can also download INStar to copy data to PC, using the
INStar software to modify file name and antenna height, and the next section
will introduce the INStar in detail.
§4.2 INStar Operation
INStar is a multi-functional setting tool, which can perform data transfer,
firmware upgrade, parameter settings, radio settings, network settings,
Receiver registration. This tool is simple and easy to use.
Install INStar to the computer
Perform “Data Output” and “Parameter settings” via USB port
；
Via serial port, the function options are “Radio Settings, Network Settings,
Receiver Register. Both can do firmware upgrades;
Important Note
When using USB, you must open INStar first; otherwise it cannot connect to
receiver!
INStar is software to help you to configure RTK, to communicate INStar with
receivers, you need L997Y \L797Y cable (depends on the receiver type) to connect
receivers along with PC.
There are 6 functions.
