K5 Plus GNSS
- 43 -
1) Set the receiver to the rover station radio mode;
2) Turn on the rover station receiver, fix it on the centering rod of the carbon
fiber pole, and screw on the UHF differential antenna;
3
）
Install the handheld bracket and the handheld data collector
；
Figure 3-5 Rover station
§3.2.4 Set rover station
Set the rover station after installing the Rover station to achieve a fixed solution
status, follow these steps:
1
）
Connect the handheld and the EGStar(see § 2.2.3)
2
）
Rover station settings: Config
→
Instrument Config
→
working mode setting
(switch the receiver working mode into rover station mode and the data link to
