K20s
- 12 -
Press F key to move the config option from one to another, and press Power key to confirm.
§2.2.2 Mode Select
In the configuration interface, press F key to access Mode Select option and press Power key to
confirm. And then we can set the working mode as Base, Rover and Static.
Static Mode Setting
Press F key to select Static mode in Mode Select Interface and press Power key to confirm.
And then press power key again to access Record Option where we can set the point name,
antenna height, sample interval, record mode and data type.
What we should do in the next is setup all the parameters for static mode. Press power key once
and enter Record Option page, all the parameter items are displayed here including point name,
