7
Before charging your printer
make sure that you have
removed the film on the battery.
If you have not removed the
film, see section 2.1 Removing
Protective Film From Your
Battery. If you have removed
the film continue reading
through section 2.3.
Insert one end of the power cord to a power
outlet and the other end to the power port on
the printer.
The printer will start charging the battery
(charging indicator light should turn on) and
can be turned on by pressing the power button.
Note:
When storing the unit for long periods of time, remove the battery from the unit to
preserve the life of the battery and prevent possible battery fluid leakage.
For consistent charging and power make sure the outlet being used has a stable power
of 110~220 Volts, and that there aren’t too many devices plugged into the same outlet.
2.3
Charging Your Printer