10
4) Remove the two screws affi xing the descending colon to the main unit, using a screwdriver.
*A screwdriver is not included with the product.
5) Remove the descending colon. Install the provided spacers for pins (10 mm) to the above two
screws, and tighten the screws at the two points shown in the illustration, below.
* For the rest of this document, the two screws will be referred to as “pins.”
6) Connect the Descending Colon to the rectum/sigmoid colon and transverse colon.
Rectum/sigmoid colon and Descending Colon Transverse colon and Descending Colon
ピン用スペーサー10mm
Spacers for pins (10 mm)
