6
Fetal heartbeat cable
Birth canal pad
Abdominal wall
protective sheet
Air feed tube
Groove
Fetal heartbeat cable
Birth canal pad
Abdominal wall
protective sheet
Air feed tube
Groove
3. Setting up the Model
3-1. Attach the fetus in amnion
1) Remove the main body from the storage bag and remove the skin.
2) Remove the abdominal wall piece that is wrapped in the abdominal wall protective sheet and
the fetus in amnion from the body; then, place a birth canal pad as shown below. Connect
the fetal heartbeat cable.
No birth canal pad ... Seitz method (-)
Birth canal pad (small) ... normal
Birth canal pad (large) ... Seitz method (+)
3) As shown in the illustration, thread the air feed tube through the panel from the inside of the
body to outside the body, and set the fetus in amnion in the body.
*The position and orientation of the fetus in amnion can be readily adjusted. When setting
it in the breech presentation, place the air feed tube in the groove on the inside of the
body so that it does not interfere.
*
Fetal heartbeat cable
Birth canal pad
Abdominal wall
protective sheet
Air feed tube
Groove
