2
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
9. In caring for the model, do not use rubbing alcohol, thinners, or benzin or other organic solvents
on the model, as doing so may cause damage.
10. Do not use the model outdoors or in damp places; doing so may damage the model.
11. Placing objects directly on top of the model or placing it on uneven surfaces may cause
deformation.
12. An excessive amount of air injected into the amnion may damage the amnion. When injecting air,
palpate the abdomen of the model to check the tension in the amnion.
13. When setting the skin on the body, the skin may have wrinkles or sags due to the construction of
the model. Please note that it may not always be possible to completely remove these wrinkles and
sags.
14. Storing the model for an extended period in a high or low temperature environment or under
exposure to direct sunlight may cause the oil component in the abdominal wall piece to ooze out,
causing deformation or discoloration of the model. If possible, store the model at 10-50°C, away
from direct sunlight.
15. Take care to avoid touching the internal parts through the gap between the panel and the body;
doing so may cause the internal electronic device to malfunction.
16. This product is intended for use in standard operating environments. Do not use it in heavy industrial
settings.
17. This model uses urethane foam for some of its parts, and may be susceptible to damage from pests
that are attracted to urethane foam (such as insects in the ant family).
When storing this model, ensure that thorough measures are taken to prevent pest damage before
storing. The company will not be involved with or held liable for pest damage that occurs during
storage.
