Koike Sanso Kogyo WEL-HANDY MINI, Operation Manual

Page: 35 / 46

WEL-HANDY MULTI
32
3 The control power cannot be turned ON (The indication lamp will not
come ON)
4 The carriage will not travel
When the stop
switch is invalid, the
printed circuit board
is defective. Replace.
Possible cause Action
The fuse is blown
out. (1A)
Warning
Strictly observe the following to prevent a short
circuit or electric shock.
Be sure to turn off the power switch before
changing the fuse.
Inspections 2 and 3 shown below are conducted
while the control power is ON, so leave the
operation to an engineer who has skill and
thorough knowledge about electricity to prevent
a short circuit or electric shock.
Power has not
reached the outlet
The cable is
disconnected Check and connect.
Possible cause Action
The speed control
is at zero Set it to the right speed.
The fuse is blown
out Replace.
The auto stop
switch has been
pressed Reset the auto stop switch.
Wel Handy.book Page 32 Wednesday, April 10, 2002 4:00 PM