Koike Sanso Kogyo WEL-HANDY MINI, Operation Manual

Page: 23 / 46

WEL-HANDY MULTI
20
3 Traveling speed control knob
Turn it clockwise for acceleration and counterclockwise for
deceleration.
The speed corresponding to the graduations of the speed setting
dial is as follows.
This setting is a tentative rough standard and changes by the
situation of the load.
4 Start button
Press the button to start welding. Because the torch switch signal is
output, the machine begins to travel.
5 Stop button
Press the button to stop
welding. The machine stops
traveling as well.
6 Mode switch
This is a three positions switch
and the following function can
be selected.
TEST : When the switch is
turned to this position, only the
wire feeder is turned to ON.
ARC ON : Use this position for normal welding operation.
By pressing START button, the machine starts to travel automatically
after the welding starts.
NEUT : This is the neutral position.
When the START button is pressed with this position, the machine
starts to travel without welding.
Graduation Speed mm/min
1 120
2 300
3 460
4 610
5 780
6 930
7 1,080
8 1,240
9 1,400
10 1,500
6
2
3 1
4 5
Wel Handy.book Page 20 Wednesday, April 10, 2002 4:00 PM