3
INSTALLATION
General
Installation must be carried out in accordance with these instructions, and must be
conducted by designated, qualified and competent personnel.
The installation must comply with the “Water Supply Regulations 1999 (Water Fittings)”
or any particular regulations and practices, specified by the local water company or
water undertakers.
Important!
The instructions contained in this Product Manual refer to the installation
of the Shower Panel only. A separate Product Manual is supplied which contains in
more detail, the installation requirements, commissioning procedures and operating
instructions of the fitted components. Read both Product Manuals before installing
your Shower Panel.
Installing the Shower Panel
1.
Decide on a suitable location for the Panel, taking into account the height of
users of the Shower.
Important!
If you are installing a pipe shroud accessory, refer to the pipe shroud
accessory installation instructions
before
continuing with the installation of your
shower panel.
2.
Position the Mounting Bracket for the top of the Shower Panel on the wall, and
mark the position of the holes.
Note!
Use a spirit level to make sure that the Mounting Bracket is horizontal.
3.
For solid walls, drill with a 7 mm Masonry Drill (not supplied) and plug using
the Wall Plugs (supplied).
Note!
For other types of wall structure alternative fixings may be required.
4.
Fix the Mounting Bracket to the wall using the Securing Screws (supplied).
5.
Locate the Shower Panel onto the Mounting Bracket and mark the position of
the bottom holes.
6.
For solid walls, drill with a 7 mm Masonry Drill (not supplied) and plug using
the Wall Plugs (supplied).
