Installing the Drain
Flange
Gasket
Apply Silicone Sealant
Washer
Nut
Drain Body
Seal Hole
P3907115
Fixture
1.
Remove the protective cover from the flange.
2.
Apply sealant around the underside of the waste in accordance with
the manufacturer’s instructions.
3.
Assemble the nut, flat washer and tapered gasket (tapered side up)
fully onto the body.
4.
From the underside of the fixture, insert the drain body up into the drain
hole.
5.
From the top of the fixture, securely hand tighten the flange onto the
drain body.
6.
Make sure that the drain body seal is facing the back of the fixture and
securely tighten the nut.
7.
Remove any excess sealant.
1023012-W2-B
13
