Kohler Memoirs Stately 3 Hole Basin Mixer, Installation And User Manual, Page: 10 / 24

P3902160
Valve
Outlet
Body
VALVE ALIGNMENT
200mm (centre to centre)
VALVE ALIGNMENT
410mm (centre to centre)
Valve
Outlet
Body Valve
Outlet
Body Valve
Outlet
Body
Spout Spout
11. Position the valve bodies in their correct orientation, usually facing
towards the spout for maximum valve centres, and facing outwards
for minimum centres. Adjust the position to suit your installation.
Note! Make sure there is sufficient clearance to thread the water supply
hoses and water supply pipe coupling nuts onto the valve body outlets.
12. Close the valves using the mixer handles.
13. Temporarily remove the handles, and re-attach them onto the valve
splines so that the handles point away from the mixer spout when the
valves are in the closed position.
14. Attach the O-ring onto the concealing plate and re-thread the handle
skirt onto the concealing plate.
15. Use a spanner to tighten the valve locknuts.
16. Screw the hoses onto the valve bodies. Use a spanner to tighten the
nuts, but do not over tighten.
1023012-W2-B
10