Two-Way Installation (cont.)
Install temporary 1/2
″
nipples in the outlet ells so they extend a
minimum of 2
″
(51 mm) beyond the finished wall.
IMPORTANT!
When testing K-728 operation, water should flow as
follows: Accessory 1, Accessories 1 and 2, Accessory 2. If water
flows as: Accessory 2, Accessory 2, Accessories 1 and 2; you will
need to remove the spacer, rotate the detent 180 degrees; then
reinstall the spacer.
IMPORTANT!
When testing K-737 operation, water will flow as
follows: Accessory 1, Accessory 2. A combined function does not
exist.
NOTE: For K-737 only:
When the valve is turned midway between
the two outlet ports, water flow from the ports will reduce to a
trickle.
Turn on the water supply to the valve and check for proper
operation and leakage. Once everything is verified, turn off the
water.
Install caps on the temporary bath and shower nipples. Turn on
the water and check all connections for leaks. Once no leakage is
verified, turn off the water.
Reinstall the plaster guard.
Complete the finished wall.
Warranty
KOHLER
®
Faucet Lifetime Limited Warranty
Kohler Co. warrants its Faucets* manufactured after January 1, 1997, to
be leak and drip free during normal residential use for as long as the
original consumer purchaser owns his or her home. If the Faucet
should leak or drip during normal use, Kohler Co. will, free of charge,
mail to the purchaser the cartridge necessary to put the Faucet in good
working condition. This warranty applies only to Kohler Faucets
installed in the United States of America, Canada or Mexico (
″
North
America
″
).
Kohler Co. also warrants all other aspects of the faucet or accessories
(
″
Faucet
″
)*, (except gold, non-Vibrant
®
, non-chrome finishes) to be free
of defects in material and workmanship during normal residential use
for as long as the original consumer purchaser owns his or her home.
This warranty applies only to Kohler Faucets installed in North
America. If a defect is found in normal residential use, Kohler Co. will,
1205548-2-D
6
Kohler Co.
