Install the Sink: Self-Rimming Installations (cont.)
Verify that the sink has not moved out of position and there are
no gaps between the sink and the countertop.
Wipe away any excess sealant with a dry cloth. Fill any voids if
needed.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Proceed to the
″
Complete the Installation
″
section.
Sealant Option 2
Carefully position the sink into the countertop opening.
From under the sink, hook the mounting clips into the metal tabs
on the sink.
Tighten the hex nuts on the clips until the rim is drawn firmly
down onto the countertop.
Do not overtighten.
The clips are
designed to hold the sink in position while the sealant cures.
Verify that the sink has not moved out of position and there are
no gaps between the sink and the countertop.
Apply a continuous bead of quality sealant around the sink rim.
Wipe away any excess sealant with a dry cloth. Fill any voids if
needed.
Proceed to the
″
Complete the Installation
″
section.
7. Recommended Undercounter Installation
CAUTION: Risk of personal injury or product damage.
The
sink is heavy. Get help lifting the sink into place.
Install the sink undermounter kit and sink according to the
instructions provided with the kit. Make sure the kit is installed
in the proper location for the sink.
Verify that the sink is level. The top of the sink should be flush
with the top of the cabinet to allow proper countertop
installation. Adjust or shim between the sink and support if
needed.
Kohler Co.
9
1050395-2-A
