3. Locate Faucet Centerline
Self-Rimming Installations
NOTE:
The following instructions apply to countertop faucet
installations for self-rimming sinks. For installations where the
faucet will be installed directly to the sink, proceed to the
″
Knock
Out the Faucet Hole
″
section.
Locate the faucet hole centerline at least 1-13/16” (4.6 cm) from
the back edge of the cutout.
With a pencil, mark the faucet hole centerline on the countertop.
Verify there is adequate clearance between the sink, faucet,
backsplash and cabinet. Make any adjustments as needed.
Drill the faucet holes according to the faucet manufacturer’s
instructions.
Proceed to the
″
Install the Sink: Self-Rimming Installations
″
section.
Cutout
1-13/16"
(4.6 cm)
Backsplash
Faucet Centerline
Self-Rimming Installations
Kohler Co.
5
1050395-2-A