1. Install the Faucet
Thread the mounting studs into the holes in the bottom of the
faucet body.
NOTE:
The base of the faucet may be attached to the lavatory using
either the supplied rubber washer or plumbers putty to form a
watertight seal. Do not attach the faucet to the lavatory using both
the rubber washer and plumbers putty.
For rubber washer attachment:
Slide the washer over the supply
inlets and up to the faucet base.
For plumbers putty attachment:
Apply the plumbers putty or
other sealant to the underside of the flange of the faucet base
according to the putty manufacturer’s instructions.
Feed the faucet supply inlets through the faucet hole of the
lavatory, then position the faucet.
Slide the washer and bracket over the mounting studs, then
securely tighten the nuts to the mounting studs.
Nut
Bracket
Washer
Lavatory
Mounting Stud
Supply Inlet
Apply
plumbers
putty.
Rubber
Washer
Kohler Co.
3
1050798-2-A
