3. Roughing-In
Showerhead/Handshower Installations
For Back-to-Back Installations:
Proceed to the
″
Install the Supply
Piping and Valve, Back-to-Back
″
section.
Route the supplies and install the valve. Refer to the roughing-in
illustration for your installation.
NOTE:
The position of the 2x4 bracing is dependent on the
thickness of your finished wall.
Install 2x4 bracing behind the plate as shown.
NOTE:
The outlet positions are dependant on your particular
installation and may differ from the illustration shown.
Install bracing at the showerhead and handshower outlet
installation locations.
Connect the water supplies using 1/2” copper, CPVC, or PEX
components. Use thread sealant on all threaded connections.
48" (1220 mm)
To Floor
Cold Supply
Hot Supply
72" (1829 mm) –
78" (1981 mm)
To Floor (Typical)
2x4 Bracing
Thin Wall
2-3/4" (70 mm)
2-1/16" (52 mm)
Finished Wall
Finished
Wall
2-3/4" (70 mm) –
3-1/2" (89 mm)
2-1/16" (52 mm)
Thick Wall
1128093-2-E
8
Kohler Co.
Summary of Contents for K-11748-K
Page 57: ...1128093 2 E...
Page 58: ...1128093 2 E...
Page 59: ...1128093 2 E...
Page 60: ...USA Canada 1 800 4KOHLER M xico 001 800 456 4537 kohler com 2015 Kohler Co 1128093 2 E...
