Toilet & Squat Repair
When repairing, you don t have to dismount the sensor.
Cover the sensing window with tape and work with ease.
: use very adhesive tape in case the scar
will be hard to remove and result in false
operations of the sensor.
Notice Don't
Clean the Filter Screen
If the flushing volume reclines sharply after installation or
used for a long time with no cause from water pressure, the
filter may need a wash.Turn off the fixed cap with
monkey
wrench
,
take out the
piston
, clean with a brush and reinstall
it.
a. Turn off the water supply or tighten the
adjusting bolt before cleaning.
b. Carefully take out the filter when cleaning to
avoid foreign materials entering the inside
of the valve body.
Notice:
Care & Clean
Keep the sensing window clean.Wipe with soft cloth and mild
cleaner.
a. Do not use dust-removing powder, abrasive
powder or cleaner containing oil, acidor
alkaline ingredient.
b. Do not spray air-refresher, disinfector, or
other deodorizing,cleaning solvent directly
into the sensing window.
c. Keep wire away from water.
d. Don t attack the sensor window.
Notice:
'
a.
b.
c.
d.
1
3
1350669-T01-A
活
塞
a.
b.
维护保养
修理座便器/蹲便器
修理座便器/蹲便器时，不必拆下感应器，只需用电工胶布粘
住感应窗口，您便可放心修理设备。
不要用强力胶布，因为粘痕会难以清除，而产
生误动作。
注意：
清洗过滤网
初装或使用较长时间后，如发现出水流速明显变小，而非水压
原因，可清洗阀体中的过滤网。用
活动扳手
旋下固定盖，取出
活塞
，刷洗
滤网
后重新装入即可。
清洗前，请先关闭水源或拧紧调节栓。
清洗时小心取出滤网，防止杂质进入阀体内部。
注意：
清洁保养
保持感应窗口清洁，可用蘸有中性清洁剂的软布擦洗。
禁止使用去污粉、研磨粉及油类、酸性类、碱
性类清洁剂。
禁止直接对感应窗口喷洒空气清新剂、消毒液
或其他除臭、清洁类有机溶剂。
避免水直接接触电线接插件。
勿撞击感应窗口。
MAINTENANCE
注意：
