-17-
B. Methods two and three: During remote installation, fix
the cover onto the tank and pull the air hose to the
panel. Reserve access panel at front or top to ensure
removal and installation of cover.
Method two: During remote plate installation,
7~20mm thickness is recommended for the wall of
the pinch plate and at least 80
3mm gap is reserved.
Method three: During remote installation of mask, 4
holes with diameter of 10mm and depth of 12mm are
needed to be reserved at the locating hose. Drill
10mm holes through air hose on the side of the mask.
Recommended installation hole size of
X
mm to remote plate installation.
297
157
B.
7~20mm
80
3mm
4
10mm
12mm
10mm
X
mm
297
157
Air hose
Pinch plate
Finished wall
Supporting
Board
7~20mm recommended
7~20mm
297
157
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
Pinch plate installation
Screw
Air hose
Pinch plate
Pinch plate
Finished wall
Faceplate
Supporting Board
C. Method four: Cut apart the cable of the air hose. Pull
it out from the front of the tank and meanwhile
reserve the access panel. Fix the four plates with
screws and then fix the support board.
No direct contact between the faceplate and the
tank.
7~20mm thickness recommended for the wall of
the pinch plate.
Note:
Recommended installation hole size of
X
mm to remote plate installation.
297
157
C.
7~20mm
X
mm
297
157
Method four:
Press from front
Air hose
Pinch plate
Finished wall
7~20mm recommended
7~20mm
+2
0
+2
0
+2
0
+2
0
80
3mm gap reserved
80
3mm
80
3mm gap reserved
80
3mm
Suggested/
80
3
Air hose
Finished
wall
Fix Mask Onto Wall
78
10 Hole through hose
10
10 Depth 12,
Space reserved
10
12
Cover,Top
Cover,Front
1402749-T01-A
