-13-
E. Faceplate Installation
E.
1)
1)
OPEN
When tighten four locknuts on supporting board, adjust
to "OPEN" mark as shown.
Supporting Board
Locknut
According to different faceplates, there are different faceplate
installations as below:
1. K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
installation
1. K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
2) Tighten four screws to "LOCK" mark after installing
supporting board as shown.
2)
LOCK
3) Install the big flush air hose and small flush air hose to
the cover.
Cut the excessive parts of the air hose if necessary
and fix it onto the tank fastener.
Put the lock on the cover directly on the
reversed lock on supporting board, then push the cover
and lock it. The installation shall begin from bottom to
top.
Note:
3)
Faceplate
Lock
Faceplate
Supporting
Board
Connect to air hose
Fastener
1402749-T01-A
