Installation
¨
Select a suitable position in the bathroom.
¨
Remove the screw at the bottom of the unit.
¨
Remove the front cover from the bottom
and then lift up the front cover.
¨
Mark 3 mounting holes of the heater base on
the wall. The heater position should be 1.5 m
above the bathroom floor.
¨
Drill 1 hole (upper part of heater base) with
Ø
6 mm drill and make the anchor holes
in depth of 34 mm.
¨
Rehearse heater unit installation for anchor
mounting location determination.
¨
Drill 2 holes (lower part of heater base)
with
Ø
6 mm drill and make the anchor holes in depth of 34 mm.
¨
For K-5627X
:
Mark 2 mounting holes of the slider rail beside the heater on the
wall. It is recommended that the top of the portion is in level with the top of
heater.
For K-72989X
:
Mark 2 mounting holes of the brackets beside the heater on
the wall.
¨
Drill 2 holes
with
Ø
6 mm drill
and make the
anchor holes
in depth of 34 mm.
¨
Insert the anchors
and mount the heater
firmly in position with
the screws provided.
¨
Insert the shower holder and
soap tray into the slider rail.
¨
Mount the slider rail to the rail bracket.
¨
Remove the cap from the rail bracket and screw the bracket to marked
position. Replace the cap.
Cap
Screw
Slider Rail
Soap
Tray
Rail
Bracket
Anchor
Screw
Bracket
Anchor
K-5627X:
Install with Slider Rail
K-72989X:
Install with Bracket
Handshower
Flow
Regulator
Rubber
Washer
Flexible Hose
Flexible Angle
Adjustment
Adjustable
Shower Holder
4 Spray
Patterns
Selection
K-5627X:
K-72989X:
1237889-X2-G 10
Kohler Co.
Summary of Contents for Englefield K-5627X
Page 34: ...1237889 X2 G 34 Kohler Co ...
Page 35: ...Kohler Co 35 1237889 X2 G ...
