Install the DC Power Unit
安装直流电源装置
电源线控制
盒
电源线电池
盒
肋条
-
Unthread the screws from the battery box to remove the
battery box cover.
- 拧下电池盒上的螺丝，卸下电池盒盖。
-
NOTE: Do not mix used and new batteries.
- 注意：请勿混用新旧电池。
-
Insert four D batteries (provided). Reinstall the battery
box cover and secure with the screws.
- 放入四节一号电池（需另购）。重新安装电池盒盖并用螺丝
固定。
-
Align the grooves on the battery box with the ribs on the
side of the control box.
- 将电池盒上的凹槽与控制盒侧面的肋条对准。
-
Mark the location of the mounting holes.
- 标记安装孔的位置。
-
NOTE: The provided wall anchors are for concrete wall
installation. Use the appropriate wall anchors depending
on your wall material.
- 注意：随机提供的膨胀螺丝适用于混凝土墙壁的安装。根据您的墙
壁材料选择合适的膨胀螺丝。
-
Drill the holes per the anchor manufacturers instructions.
If using the provided wall anchors, drill 1/4” (6 mm) pilot
holes.
- 根据锚固件制造商的说明进行钻孔。如果采用随机提供的膨胀螺丝，
需要钻取1/4" (6 mm)的导向孔。
-
Slide the battery box onto the ribs on the side of the
control box. Secure with the screws.
- 将电池盒滑到控制盒侧面的肋条上。使用螺丝固定。
1434862-T01-
D
8
