6. Install the Valve Bodies
NOTE:
Do not solder the connections at this time.
Cut two 2-7/8
″
(73 mm) pieces of copper tubing. For wider
installations, adjust this length accordingly.
Connect the copper tubing and tee to the valve body assembly.
Thread a mounting nut all the way down each valve body.
Slide a fiber washer, then a rubber washer down each valve body.
Insert the valve bodies up through the mounting holes so the
valve body marked
″
COLD
″
is on the right when facing the
faucet.
Temporarily hold the valve bodies in place.
For rough-deck installation proceed to
″
Install the Tubing.
″
Finished-Deck or Rim-Mount Only
Cut one 2-3/8
″
(60 mm) piece of copper tubing.
Insert the copper tubing into the tee and the supply tube.
2-3/8" (60 mm)
Copper Tubing
2-7/8" (73 mm)
Copper Tubing
Fiber
Washer
Rubber
Washer
2-7/8"
(73 mm)
Copper
Tubing
2-3/8"
(60 mm)
For Finished-Deck or
Rim-Mount Only
Mounting
Nut
Kohler Co.
9
1275145-2-A
