Koganei YMDA Series, Compact & Direct Mounting

Page: 28 / 35

27
Solid state type, reed switch type
Symbol
Double acting type Single acting push type Single acting pull type Non-rotating double acting type / double acting type with guide
Sensor switches
High multi cylinder
ZE135
†
2-lead wire
—
10 to 28VDC
4 to 20 mA (at 25°C [77ºF], 10 mA at 60°C [140ºF])
—
4V MAX.
0.7 mA MAX. (24VDC, 25°C [77ºF])
PCCV0.2SQ × 2-leads (brown, blue) ×
R
Note 3
ZE155
†
ZE175
†
4.5 to 28VDC
4.5 to 28VDC
50 mA MAX.
0.5V MAX. (at 20 mA for voltage below 10V)
50µA MAX. (24VDC)
PCCV0.15SQ × 3-leads (brown, blue, black) ×
R
Note 3
ZE255
†
ZE275
†
4.5 to 28VDC
4.5 to 28VDC
50 mA MAX.
0.5V MAX. (at 20 mA for voltage below 10V)
50µA MAX. (24VDC)
PCCV0.15SQ × 3-leads (brown, blue, black) ×
R
Note 3
Item
Wiring type
Lead wire direction
Power supply voltage
Load voltage
Load current
Consumption current
Internal voltage drop
Note 1
Leakage current
Response time
Insulation resistance
Dielectric strength
Shock resistance
Note 2
Vibration resistance
Note 2
Environmental protection
Operation indicator
Lead wire
Ambient temperature
Storage temperature range
Mass
Model
Note 1: Internal voltage drop varies depending on load current.
2: Measured by Koganei test standards.
3: Lead wire length
R
: A; 1000 mm [39 in.], B; 3000 mm [118 in.], G; 300 mm [11.8 in.] with M8 connector, ZE175
†
, ZE275
†
only
Horizontal Vertical
Solid state type
Specifications
ZE101
†
0.1 V MAX. (at load current of DC 40 mA)
None
ZE102
†
3.0V MAX.
When ON, red LED indicator lights up
ZE201
†
0.1 V MAX. (at load current of DC 40 mA)
None
ZE202
†
3.0V MAX.
When ON, red LED indicator lights up
Item
Wiring type
Lead wire direction
Load voltage
Load current
Internal voltage drop
Note 1
Leakage current
Response time
Insulation resistance
Dielectric strength
Shock resistance
Note 2
Vibration resistance
Note 2
Environmental protection
Operation indicator
Lead wire
Ambient temperature
Storage temperature range
Contact protection
Mass
Model
Note 1: Internal voltage drop varies depending on load current.
2: Measured by Koganei test standards.
3: Lead wire length ℓ : A; 1000 mm [39 in.], B; 3000 mm [118 in.]
Horizontal Vertical
Reed switch type
5 to 28VDC
40 mA MAX.
85 to 115VAC (r.m.s)
20 mA MAX.
10 to 28VDC
5 to 40 mA
85 to 115VAC (r.m.s)
5 to 20 mA
5 to 28VDC
40 mA MAX.
85 to 115VAC (r.m.s)
20 mA MAX.
10 to 28VDC
5 to 40 mA
85 to 115VAC (r.m.s)
5 to 20 mA
8 mA MAX. (24VDC)
3-lead wire NPN output 3-lead wire NPN output
8 mA MAX. (24VDC) 10 mA MAX. (24VDC)
3-lead wire PNP output 3-lead wire PNP output
10 mA MAX. (24VDC)
2-lead wire
0 mA
1 ms MAX.
100 M Ω MIN. (at 500VDC megger, between case and lead wire terminal)
1500VAC (50/60 Hz) 1 minute (between case and lead wire terminal)
294.2 m/s
2
[30 G] (non-repeated shock)
88.3 m/s
2
[9 G] (total amplitude 1.5 mm [0.059 in.], 10 to 55 Hz), resonance frequency 2570 ± 250 Hz
IP67 (IEC standard), JIS C0920 (water-proof type)
PCCV0.2SQ × 2-leads (brown, blue) ×
R
Note 3
0 〜 60 ℃ [32 〜 140ºF]
−10 〜 70 ℃ [14 〜 158ºF]
Required (Refer to contact protection countermeasure described in page
C
)
15 g [0.53 oz.] (lead wire length A: 1000 mm [39 in.]), 35 g [1.23 oz.] (lead wire length B: 3000 mm [118 in.])
1 ms MAX.
100 M
Ω
MIN. (at 500VDC megger, between case and lead wire terminal)
500VAC (50/60 Hz) 1 minute (between case and lead wire terminal)
294.2 m/s
2
[30 G] (non-repeated shock)
88.3 m/s
2
[9 G] (total amplitude 1.5 mm [0.059 in.], 10 to 55 Hz)
IP67 (IEC standard), JIS C0920 (water-proof type)
When ON, red LED indicator lights up
0
〜
60ºC [32
〜
140ºF]
−10
〜
70ºC [14
〜
158ºF]
15 g [0.53 oz.] (lead wire length A: 1000 mm [39 in.]), 35 g [1.23 oz.] (lead wire length B: 3000 mm [118 in.]), 15 g [0.53 oz.] (lead wire length 300 mm [11.8 in.] with M8 connector)
ZE235
†
2-lead wire
—
10 to 28VDC
4 to 20 mA (at 25°C [77°F], 10 mA at 60°C [140°F])
—
4V MAX.
0.7 mA MAX. (24VDC, 25°C [77ºF])
PCCV0.2SQ × 2-leads (brown, blue) ×
R
Note 3