background image

KOGANEI CORP. shall in no way be liable or responsible for 

injuries or damage to persons or property arising out of the use 

or operation of the manufacturer’s product.

This warranty shall be void if the engineered safety devices 

are removed, made inoperative or not periodically checked for 

proper functioning.

Any operation beyond the rated capacity, any improper use or 

application, or any improper installation of the product, or any 

substitution upon it with parts not furnished or approved by 

KOGANEI CORP., shall void this warranty.

This warranty covers only such items supplied by KOGANEI 

CORP. The products of other manufacturers are covered only 

by such warranties made by those original manufacturers, even 

though such items may have been included as the components.

The specifications are subject to change without notice.

Limited Warranty

KOGANEI CORP. warrants its products to be free from defects

in material and workmanship subject to the following provisions.

The warranty period is 180 days from the date 

of delivery.

If a defect in material or workmanship is found 

during the warranty period, KOGANEI CORP. 

will replace any part proved defective under 

normal use free of charge and will provide the 

service necessary to replace such a part.

This warranty is in lieu of all other warranties, 

expressed or implied, and is limited to the 

original cost of the product and shall not 

include any transportation fee, the cost of 

installation or any liability for direct, indirect 

or consequential damage or delay resulting 

from the defects.

Warranty Period

Koganei 
Responsibility

Limitations

11/’11 10  AK
©KOGANEI CORP. PRINTED IN CHINA

URL   http://www.koganei.co.jp

E-mail:  [email protected]

OVERSEAS GROUP

3-11-28, Midori-cho, Koganei City, Tokyo 184-8533, Japan
Tel: 042-383-7271  Fax: 042-383-7276

KOGANEI INTERNATIONAL AMERICA, INC.

39300 Civic Center Dr., Suite 280, Fremont, CA 94538, U.S.A.
Tel: 510-744-1626  Fax: 510-744-1676

SHANGHAI KOGANEI INTERNATIONAL TRADING CORPORATION

Room 2606-2607, Tongda Venture Building No.1, Lane 600, Tianshan Road, Shanghai, 200051, China
Tel: 021-6145-7313  Fax: 021-6145-7323

KOGANEI KOREA CO., LTD.

KT&G Cosmo Bldg., 3F, 40-13, Maesanno 2-ga, Paldal-gu, Suwon-si, Gyeonggi-do, 442-847, Korea
Tel: 82-31-246-0414  Fax: 82-31-246-0415

KOGANEI-PORNCHAI CO., LTD.

89/174 Moo 3, Vibhavadee Rangsit Road, Talad Bangkhen, Laksi, Bangkok, 10210, Thailand
Tel: 02-551-4025  Fax: 02-551-4015

KOGANEI ASIA PTE. LTD.

7500A Beach Road #06-320, The Plaza, 199591, Singapore
Tel: 65-6293-4512  Fax: 65-6293-4513

Summary of Contents for YMDA Series




































Reviews: